Pegasus Mail & Mercury

I recently downloaded and installed the Mercury mail platform trying to set up a mailing system for my web server at home. I was easily able to configure it to receive mail using thunderbird. I was also able to easily configure it to send emails to my work account. But when trying to send to my personal accounts (gmail, hotmail, yahoo) I was unable to send mail. Here is the error I am getting when trying to send to gmail:

 
 14:57:59: processing job MO00002B
Resolved MX for 'gmail.com' to 64.233.185.114
Connecting to 64.233.185.114
Connection error.
Attempting connection to alternate, 66.249.91.27
Connection error on alternate.
Attempting connection to alternate, 209.85.143.114
Connection error on alternate.
Attempting connection to alternate, 209.185.147.27
Connection error on alternate.


14:57:59: processing job MO00002D
14:57:59: processing job MO00002E
14:57:59: processing job MO000030
Resolved MX for 'gmail.com' to 64.233.185.114
Resolved MX for 'gmail.com' to 64.233.185.114
Resolved MX for 'gmail.com' to 64.233.185.114
Connecting to 64.233.185.114
Connecting to 64.233.185.114
Connecting to 64.233.185.114
Connection error.
Connection error.
Connection error.
Attempting connection to alternate, 66.249.91.27
Attempting connection to alternate, 66.249.91.27
Attempting connection to alternate, 66.249.91.27
Connection error on alternate.
Connection error on alternate.
Connection error on alternate.
Attempting connection to alternate, 209.85.143.114
Attempting connection to alternate, 209.85.143.114
Attempting connection to alternate, 209.85.143.114
Connection error on alternate.
Connection error on alternate.
Connection error on alternate.
Attempting connection to alternate, 209.185.147.27
Attempting connection to alternate, 209.185.147.27
Attempting connection to alternate, 209.185.147.27
Connection error on alternate.
Connection error on alternate.
Connection error on alternate.

 

Anyone able to give me some ideas? 

I am using modules S,E, & P 

The IP addresses are valid, turn on session logging and you might be able to determine why the server is rejecting the connection.  They in fact be rejecting on the fact that you do not have a fixed IP address.

 

 

---

Thomas R. Stephenson
San Jose, California
Member of Pegasus Mail Support Team

I do not answer private messages from the forum. If you want to contact me use email to techsupp@tstephenson.com.

Thomas R. Stephenson:

They in fact be rejecting on the fact that you do not have a fixed IP address.

 

Anyway to correct this? My ISP does not offer fixed IPs to customers, therefore I am using dnsExit to keep track of my IP. 

Anyway to correct this? My ISP does not offer fixed IPs to customers, therefore I am using dnsExit to keep track of my IP

Use MercuryC and send via your ISPs SMTP host.

 

---

Thomas R. Stephenson
San Jose, California
Member of Pegasus Mail Support Team

I do not answer private messages from the forum. If you want to contact me use email to techsupp@tstephenson.com.

I changed from MercuryE to MercuryC. Restarted the software, and configured it to use my ISPs SMTP server utilizing my login name. It will send to my work account, but gmail, hotmail, yahoo, and several others still will not receive mail from me.

What does the error message say?

Sorry for taking so long to reply. Been very busy at work. Anyways,, here is the error message copied from the error email.

 

 

Postmaster Notify: Delivery Failure. 

The attached message has failed delivery and has been referred
to you as postmaster. The following error report or reports
were given to explain the problem:

   *** xxxxx@gmail.com
   550 relaying blocked, read new mail, add 65.87.57.8 to forwarding or enable smtp authentication in your

 

 

chucklez:

Sorry for taking so long to reply. Been very busy at work. Anyways,, here is the error message copied from the error email.

Postmaster Notify: Delivery Failure. 

The attached message has failed delivery and has been referred
to you as postmaster. The following error report or reports
were given to explain the problem:

   *** xxxxx@gmail.com
   550 relaying blocked, read new mail, add 65.87.57.8 to forwarding or enable smtp authentication in your

 

 

Is this coming from your relay host?  If so turn on ESMTP authorization in MercuryC. Also turn on session logging in MercuryC to verify your are properly sending the mail to the relay host.

 

 

---

Thomas R. Stephenson
San Jose, California
Member of Pegasus Mail Support Team

I do not answer private messages from the forum. If you want to contact me use email to techsupp@tstephenson.com.

Use Extended SMTP was checked. I just verified that. I just enabled session logging. Let me try to send another email and see what I get.

Here is what i got from the logging report. I XXXXXX out personal email adresses.

 

12:27:47.078: --- Sun Jul 27 12:27:47 2008 ---
12:27:47.078: Connect to 'mail.htc.net', timeout 30.
12:27:49.359: >> 220 htc.net SurgeSMTP (Version 3.8k4-4) http://surgemail.com<cr><lf>
12:27:49.359: << EHLO XXXXXX<cr><lf>
12:27:49.406: >> 250-htc.net. Hello XXXXXX (65.87.57.8)<cr><lf>
12:27:49.406: >> 250-AUTH PLAIN LOGIN<cr><lf>
12:27:49.406: >> 250-ETRN<cr><lf>
12:27:49.406: >> 250-X-ID 6d783131303233343237303236<cr><lf>
12:27:49.406: >> 250-SIZE 20480000<cr><lf>
12:27:49.406: >> 250 HELP<cr><lf>
12:27:49.406: << AUTH LOGIN<cr><lf>
12:27:49.437: >> 334 VXNlcm5hbWU6<cr><lf>
12:27:49.437: << c2hhd25uYXA=<cr><lf>
12:27:49.484: >> 334 UGFzc3dvcmQ6<cr><lf>
12:27:49.484: << QWJDMTIz<cr><lf>
12:27:49.578: >> 235 login succeeded<cr><lf>
12:27:49.578: << MAIL FROM:<admin@archmagelegacy.com> SIZE=686<cr><lf>
12:27:50.687: >> 250 Command MAIL OK<cr><lf>
12:27:50.687: << RCPT TO:<XXXXXX@gmail.com><cr><lf>
12:27:55.828: >> 550 relaying blocked, read new mail, add 65.87.57.8 to forwarding or enable smtp authentication in your<cr><lf>
12:27:55.828: << RCPT TO:<XXXXXX@htc.net><cr><lf>
12:27:55.890: >> 250 local recipient ok<cr><lf>
12:27:55.890: << RCPT TO:<XXXXXX@yahoo.com><cr><lf>
12:27:59.015: >> 550 relaying blocked, read new mail, add 65.87.57.8 to forwarding or enable smtp authentication in your<cr><lf>
12:27:59.015: << RCPT TO:<XXXXXX@margraphics.com><cr><lf>
12:27:59.078: >> 250 local recipient ok<cr><lf>
12:27:59.078: << DATA<cr><lf>
12:27:59.609: >> 354 Command DATA Start mail input; end with <CRLF>.<CRLF><cr><lf>
12:27:59.609: << Received: from Spooler by XXXXXX (Mercury/32 v4.62) ID MO000024;<cr><lf>  27 Jul 2008 12:27:59 -0500<cr><lf>
12:27:59.609: << Received: from spooler by archmagelegacy.com (Mercury/32 v4.62); 27 Jul 2008 12:27:45 -0500<cr><lf>
12:27:59.609: << Received: from [127.0.0.1] (127.0.0.1) by archmagelegacy.com (Mercury/32 v4.62) with ESMTP ID MG000023;<cr><lf>
12:27:59.609: <<    27 Jul 2008 12:27:42 -0500<cr><lf>
12:27:59.609: << Message-ID: <488CB00D.9010007@archmagelegacy.com><cr><lf>
12:27:59.609: << Date: Sun, 27 Jul 2008 12:27:41 -0500<cr><lf>
12:27:59.609: << From: admin <admin@archmagelegacy.com><cr><lf>
12:27:59.609: << User-Agent: Thunderbird 2.0.0.16 (Windows/20080708)<cr><lf>
12:27:59.609: << MIME-Version: 1.0<cr><lf>
12:27:59.609: << To: <XXXXXX@gmail.com>, XXXXXX@htc.net, <cr><lf>
12:27:59.609: <<  XXXXXX@yahoo.com, XXXXXX@XXXXXX.com<cr><lf>
12:27:59.609: << Subject: test<cr><lf>
12:27:59.609: << Content-Type: text/plain; charset=ISO-8859-1; format=flowed<cr><lf>
12:27:59.609: << Content-Transfer-Encoding: 7bit<cr><lf>
12:27:59.609: << <cr><lf>
12:27:59.609: << test for logging purposes.<cr><lf>
12:27:59.609: << .<cr><lf>
12:28:00.500: >> 250 message sent ok<cr><lf>
12:28:00.500: << QUIT<cr><lf>
12:28:00.531: >> 221 Command QUIT, disconnecting<cr><lf>
12:28:00.531: --- Connection closed normally at Sun Jul 27 12:28:00 2008. ---
12:28:00.531:
 

You Internet provider's SMTP server requires authentication for sending to non-local recipients, and apparently the provided AUTH LOGIN wasn't satisfactory for this. You could try the other method in MercuryC configuration (authenticate via prior POP3 connection) instead, as suggested in the 550 reply message.

/Rolf 

You got a successful ESMTP Authorization and still it would not allow you to relay.  Personally I'd pass this section of the session log to the ISP and ask them what ia going on. 

 

12:27:47.078: --- Sun Jul 27 12:27:47 2008 ---
12:27:47.078: Connect to 'mail.htc.net', timeout 30.
12:27:49.359: >> 220 htc.net SurgeSMTP (Version 3.8k4-4) http://surgemail.com<cr><lf>
12:27:49.359: << EHLO XXXXXX<cr><lf>
12:27:49.406: >> 250-htc.net. Hello XXXXXX (65.87.57.8)<cr><lf>
12:27:49.406: >> 250-AUTH PLAIN LOGIN<cr><lf>
12:27:49.406: >> 250-ETRN<cr><lf>
12:27:49.406: >> 250-X-ID 6d783131303233343237303236<cr><lf>
12:27:49.406: >> 250-SIZE 20480000<cr><lf>
12:27:49.406: >> 250 HELP<cr><lf>
12:27:49.406: << AUTH LOGIN<cr><lf>
12:27:49.437: >> 334 VXNlcm5hbWU6<cr><lf>
12:27:49.437: << c2hhd25uYXA=<cr><lf>
12:27:49.484: >> 334 UGFzc3dvcmQ6<cr><lf>
12:27:49.484: << QWJDMTIz<cr><lf>
12:27:49.578: >> 235 login succeeded<cr><lf>
12:27:49.578: << MAIL FROM:<admin@archmagelegacy.com> SIZE=686<cr><lf>
12:27:50.687: >> 250 Command MAIL OK<cr><lf>
12:27:50.687: << RCPT TO:<XXXXXX@gmail.com><cr><lf>
12:27:55.828: >> 550 relaying blocked, read new mail, add 65.87.57.8 to forwarding or enable smtp authentication in your<cr><lf>
12:27:55.828: << RCPT TO:<XXXXXX@htc.net><cr><lf>
12:27:55.890: >> 250 local recipient ok<cr><lf>
12:27:55.890: << RCPT TO:<XXXXXX@yahoo.com><cr><lf>
12:27:59.015: >> 550 relaying blocked, read new mail, add 65.87.57.8 to forwarding or enable smtp authentication in your<cr><lf>
12:27:59.015: << RCPT TO:<XXXXXX@margraphics.com><cr><lf>
12:27:59.078: >> 250 local recipient ok<cr><lf>
12:27:59.078: << DATA<cr><lf>

---

Thomas R. Stephenson
San Jose, California
Member of Pegasus Mail Support Team

I do not answer private messages from the forum. If you want to contact me use email to techsupp@tstephenson.com.

I got the same problem here, have you solved the problem, if yes, can you help me out please.