AW: AW: Bug on V4.72 ?

bussibaer

posted Jul 26 '09 at 9:40 pm

[quote user="Thomas R. Stephenson"]

......

> In the second step i cancel the mercury and restart the server.
> After this i must do the two steps again. Is that normal? The older
> versions don't need the procedure, to go online.

No this is not normal but for some reason it does this for some people when using MercuryX at least.

>
........
[/quote]

Thanks again Thomas,

after i have deactivate the MercuryX, the Moduls are going only directly on startup.

[quote user="Thomas R. Stephenson"] ...... &gt; In the second step i cancel the mercury and restart the server. &gt; After this i must do the two steps again. Is that normal? The older &gt; versions don't need the procedure, to go online. No this is not normal but for some reason it does this for some people when using MercuryX at least. &gt; ........ [/quote]Thanks again Thomas,after i have deactivate the MercuryX, the Moduls are going only directly on startup.&nbsp; &nbsp;

bussibaer

posted Jul 26 '09 at 2:51 am

Hi

First, sorry for my bad english. [:$]

I use the Mercury/32 on a win XP home installation, only on a local network (peer to peer). Today i have updatet from version 4.62 to 4.72 and i get some trouble. I would like to send an EMail from one account to another (via pegasusmail), the connect to server failed with message: 15: Peer connect failure (the host has refused the connection). This error occurs by sending and receiving. By checking with telnet host 25 i get the message, that no connection is possible to port 25 on the server(also port 110).

A look with Tcpview shows me, that the mercury only listend on port 106, but not on another ports.

So i copy my backup back to the folder. After that, the mercury works fine.

Here is my mercury.ini:

# MERCURY.INI generated by Mercury Setup
#
#
# Sample Bindery Mode MERCURY.INI file (in fact, the one I use on
# my production server). This one implements most of the possible
# switches for each module, but you can edit it to do less if you
# wish. All the fields shown below are described in the file
# MGUIDE.HLP which is supplied in the Mercury archive.
#
# Anything after a '#' to the end of the line is a comment and
# is stripped out before parsing. Trailing and leading whitespace
# is also stripped before parsing. Many sample commands have been
# left in this file commented out for reference purposes.
#

[General]
myname:          bighubi.de    # Canonical name for this server
timezone:        +0000    # Time Zone to add to date fields
file_api:        1    # Use the file api instead of queues
mailqueue:       D:\WEBSERVER\XAMPP\MERCURYMAIL\QUEUE    # Where mail should be put for delivery
smtpqueue:       D:\WEBSERVER\XAMPP\MERCURYMAIL\QUEUE    # Where the SMTP client should look for mail
newmail_path:    D:\WEBSERVER\XAMPP\MERCURYMAIL\MAIL\~N    # Where to find the users' WinPMail mailboxes.

[Protocols]
MERCURYS.DLL
MERCURYP.DLL
# MERCURYE.DLL
MERCURYC.DLL
# MERCURYD.DLL
# MERCURYH.DLL
MERCURYF.DLL
MERCURYW.DLL
MERCURYX.DLL
# MERCURYI.DLL
# MERCURYB.DLL

[Mercury]
failfile:      D:\WebServer\xampp\MERCURYMAIL\Mercury\FAILURE.MER    # Delivery failure notification template
confirmfile:   D:\WebServer\xampp\MERCURYMAIL\Mercury\CONFIRM.MER    # Delivery confirmation template
aliasfile:     D:\WebServer\xampp\MERCURYMAIL\Mercury\ALIAS.MER    # System-wide alias file
synfile:       D:\WebServer\xampp\MERCURYMAIL\Mercury\SYNONYM.MER    # User synonym database
listfile:      D:\WebServer\xampp\MERCURYMAIL\Mercury\LISTS.MER    # List of lists
logfile:       D:\WebServer\xampp\MERCURYMAIL\Mercury\bighubi.log    # Traffic logging file
logwidth:      30    # Width of address fields in logfile
retpath:       1    # Do/Don't use 'return-path' for errors
maxhops:       30    # Used to detect mailing loops
gullible:      1    # If NZ, don't validate 'From' fields
bitnethost:    cunyvm.cuny.edu    # Relay host for '.bitnet' rewrites
poll:          30   # Seconds between queue polling cycles
scratch:       D:\WebServer\xampp\MERCURYMAIL\Scratch    # Where we can write temp files
returnlines:   15    # How many lines of failed messages to return
postmaster:    Admin    # NetWare UIC of postmaster
broadcast:     0    # Yes, we want broadcast notifications, but
receipts:      0    # ... no broadcasts for receipt confirmations
PM_notify:     1    # Do/Don't send errors to the postmaster
change_owner: 1    # Change message ownership to recipient
auto_tzone:    1    # If NZ, obtain timezone information from OS
LogLevel:      15    # System message reporting level
LogMax:        100    # Maximum number of system messages to store
RetryPeriod:   30    # Period between job retries (minutes)
MaxRetries:    16    # Maximum number of times a job can fail
TwoPasses:     1    # If NZ, process submission queue in 2 passes
Autoaddress:   7    # If NZ, auto-generate user addresses based on name
Daily_exit:    0    # If NZ, auto-restart each day after maintenance
No_Areply:     0    # If NZ, disable automatic replies system-wide
Alt_Forward:   0    # If NZ, allow alternate forwarding specification
Maint_hour:    2    # Hour for daily maintenance (24-hour clock)
Maint_min:     0    # Minute for daily maintenance
Retry_Mode:    0    # If NZ, use progressive backoff for queue retries
Local_DSNs:    1    # If NZ generate Delivery Status for local users only
DSN_time1:     10800    # Seconds deferred before first DSN is sent
DSN_time2:     86400    # Seconds deferred before second DSN is sent
DSN_time3:     259200    # Seconds deferred before third DSN is sent
Host_in_title: 0    # If NZ, show hostname in system tray and taskbar
Lingering:     0    # Enable or disable 'lingering mailboxes'
Linger_Timeout: 60   # Seconds before a lingering mailbox is shut down
Alert_Host:    notify.pmail.com    # Host to check for licensee advisories
Alert_Interval: 720   # Frequency in minutes (min 240) for checks
Alert_Flags:   3    # Flags controlling advisory checks

[MercuryC]
Failfile : D:\WebServer\xampp\MERCURYMAIL\Mercury\FAILURE.MER
Poll : 30
Scratch : D:\WebServer\xampp\MERCURYMAIL\Mercury
ReturnLines : 15
Timeout : 30
ESMTP : 0
POP3_Auth : 0
Logfile : D:\WebServer\xampp\MERCURYMAIL\Logs
Log_Verbose : 1
Session_logging : D:\WebServer\xampp\MERCURYMAIL\Logs
Session_logmode : 1

[MercuryE]
HELO : bighubi
Poll : 15
Timeout : 60
Nameservers : 127.0.0.1
Log_Verbose : 0
DNS_Timeout : 20
DNS_Retries : 4
Transcripts : 1
MaxThreads : 10

[MercuryD]
Scratch : D:\WebServer\xampp\MERCURYMAIL\Mercury
Timeout : 30
Poll : 90

[MercuryS]
Debug : 1
HELO : bighubi.de
Logfile : D:\WebServer\xampp\MERCURYMAIL\Logs\MERCURYS.LOG
Timeout : 30
Relay : 1
Strict_Relay : 0
Allow_Illegals : 0
SMTP_Authentication : 0
Session_logging : D:\WebServer\xampp\MERCURYMAIL\Logs
Session_logmode : 1
Compliance_Settings : 0
Maximum_Failed_Rcpts : 4
Max_Relay_Attempts : 4
SSL_Mode : 0
ST_Blacklisting : 288
No_VRFY : 0
SMTP_ConnFlags : 0

[MercuryP]
Scratch : D:\WebServer\xampp\MERCURYMAIL\Mercury
Logfile : D:\WebServer\xampp\MERCURYMAIL\Mercury\pop3.log
Stack : 32768
Mark_Read : 1
SSL_Mode : 0
Login_Disabled : 0
UIDL_nul_list : 1
New_UIDs : 0
No_NUL_passwords : 1
Session_logging : D:\WebServer\xampp\MERCURYMAIL\Mercury\sessions.log
Session_logmode : 1
Timeout : 60

[MercuryX]
# Cmd_Delay: 10
# Cmd_Wait: 1
# IE4_Dialling: 0
# Use_ETRN: 1
# Clients_only: 1
# Sunday: 0800,1800,3,15,30,60
# Monday: 0830,2100,5,15,60,60
# Tuesday: 0830,2100,5,15,60,60
# Wednesday: 1500,1900,2,30,5,30
# Thursday: 0900,1900,2,30,0,0
# Friday: 0830,2100,5,15,60,60
# Saturday: 1031,1035,2,45,-1,0

# [Groups]
# testgroup            :     TESTGRP

[Domains]
bighubi: bighubi
bighubi: bighubi.net
bighubi: bighubi.org
bighubi: bighubi.com
bighubi: bighubi.de

[Maiser]
Maiser:          Maiser   # 'Username' of mail server account
Helpfile:        D:\WebServer\xampp\MERCURYMAIL\Mercury\MAISER.HLP   # Help sent on failed maiser requests
Lookupfile:      D:\WebServer\xampp\MERCURYMAIL\Mercury\MAISER.LKP   # Format file for the 'lookup' command
Send_dir:        D:\WebServer\xampp\MERCURYMAIL\Mercury\SENDABLE   # Directory for the 'send' command
Logfile:         D:\WebServer\xampp\MERCURYMAIL\Logs\MAISER.LOG   # Mail server log file
Notify:          D:\WebServer\xampp\MERCURYMAIL\Mercury\TMP   # Dir. for pending 'notify' commands
NoList:          N   # If 'Y', disable the 'list' command
Local_only:      N   # If 'Y', local 'notify' commands only

[MercuryH]
Logfile              :     D:\WebServer\xampp\MERCURYMAIL\Logs\MERCURYH.LOG
# Addressbook : \\CLIO\SYS\SYSTEM\MERCURY\PH.PMR
# MOTD : \\CLIO\SYS\SYSTEM\MERCURY\PH-MOTD.TXT
# Administrator : postmaster@clio.pmail.gen.nz
Timeout : 30

[MercuryI]
Scratch : D:\WebServer\xampp\MERCURYMAIL\SCRATCH
Timeout : 120
Server_Port : 143
Idle_Timeout : 1800
SSL_Mode : 0
Login_Disabled : 0

[MercuryB]
Scratch : D:\WebServer\xampp\MERCURYMAIL\SCRATCH
Timeout : 120
Server_Port : 80
Idle_Timeout : 1800

[Groups]

[Rewrite]

[Statistics]
StatFlags:    11 # Statistical reporting settings
StatFiles:    D:\WebServer\xampp\MERCURYMAIL\Mercury\statistic.log # Directory to write stat log files
StatMail:     D:\WebServer\xampp\MERCURYMAIL\Mercury\email.log # Address to send stat log files
STF_Hours:    24 # How often to write stat log files
STM_Hours:    24 # How often to e-mail stat log files

Hope is a little clue for you.

Greetings from Kiel

Jörg

HiFirst, sorry for my bad english.&nbsp;[:$] I use the Mercury/32 on a win XP home installation, only on a local network (peer to peer). Today i have updatet from version 4.62 to 4.72 and i get some trouble. I would like to send an EMail from one account to another (via pegasusmail), the connect to server failed with message: 15: Peer connect failure (the host has refused the connection). This error occurs by sending and receiving. By checking with telnet host 25 i get the message, that no connection is possible to port 25 on the server(also port 110).A look with Tcpview shows me, that the mercury only listend on port 106, but not on another ports.&nbsp;So i&nbsp; copy my backup back to the folder. After that, the mercury works fine.Here is my mercury.ini:#&nbsp; MERCURY.INI generated by Mercury Setup # # #&nbsp; Sample Bindery Mode MERCURY.INI file (in fact, the one I use on #&nbsp; my production server). This one implements most of the possible #&nbsp; switches for each module, but you can edit it to do less if you #&nbsp; wish. All the fields shown below are described in the file #&nbsp; MGUIDE.HLP which is supplied in the Mercury archive. # #&nbsp; Anything after a '#' to the end of the line is a comment and #&nbsp; is stripped out before parsing. Trailing and leading whitespace #&nbsp; is also stripped before parsing. Many sample commands have been #&nbsp; left in this file commented out for reference purposes. # [General] myname:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; bighubi.de&nbsp;&nbsp;&nbsp; # Canonical name for this server timezone:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; +0000&nbsp;&nbsp;&nbsp; # Time Zone to add to date fields file_api:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 1&nbsp;&nbsp;&nbsp; # Use the file api instead of queues mailqueue:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; D:\WEBSERVER\XAMPP\MERCURYMAIL\QUEUE&nbsp;&nbsp;&nbsp; # Where mail should be put for delivery smtpqueue:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; D:\WEBSERVER\XAMPP\MERCURYMAIL\QUEUE&nbsp;&nbsp;&nbsp; # Where the SMTP client should look for mail newmail_path:&nbsp;&nbsp;&nbsp; D:\WEBSERVER\XAMPP\MERCURYMAIL\MAIL\~N&nbsp;&nbsp;&nbsp; # Where to find the users' WinPMail mailboxes. [Protocols] MERCURYS.DLL MERCURYP.DLL # MERCURYE.DLL MERCURYC.DLL # MERCURYD.DLL # MERCURYH.DLL MERCURYF.DLL MERCURYW.DLL MERCURYX.DLL # MERCURYI.DLL # MERCURYB.DLL [Mercury] failfile:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; D:\WebServer\xampp\MERCURYMAIL\Mercury\FAILURE.MER&nbsp;&nbsp;&nbsp; # Delivery failure notification template confirmfile:&nbsp;&nbsp; D:\WebServer\xampp\MERCURYMAIL\Mercury\CONFIRM.MER&nbsp;&nbsp;&nbsp; # Delivery confirmation template aliasfile:&nbsp;&nbsp;&nbsp;&nbsp; D:\WebServer\xampp\MERCURYMAIL\Mercury\ALIAS.MER&nbsp;&nbsp;&nbsp; # System-wide alias file synfile:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; D:\WebServer\xampp\MERCURYMAIL\Mercury\SYNONYM.MER&nbsp;&nbsp;&nbsp; # User synonym database listfile:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; D:\WebServer\xampp\MERCURYMAIL\Mercury\LISTS.MER&nbsp;&nbsp;&nbsp; # List of lists logfile:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; D:\WebServer\xampp\MERCURYMAIL\Mercury\bighubi.log&nbsp;&nbsp;&nbsp; # Traffic logging file logwidth:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 30&nbsp;&nbsp;&nbsp; # Width of address fields in logfile retpath:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 1&nbsp;&nbsp;&nbsp; # Do/Don't use 'return-path' for errors maxhops:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 30&nbsp;&nbsp;&nbsp; # Used to detect mailing loops gullible:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 1&nbsp;&nbsp;&nbsp; # If NZ, don't validate 'From' fields bitnethost:&nbsp;&nbsp;&nbsp; cunyvm.cuny.edu&nbsp;&nbsp;&nbsp; # Relay host for '.bitnet' rewrites poll:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 30&nbsp;&nbsp; # Seconds between queue polling cycles scratch:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; D:\WebServer\xampp\MERCURYMAIL\Scratch&nbsp;&nbsp;&nbsp; # Where we can write temp files returnlines:&nbsp;&nbsp; 15&nbsp;&nbsp;&nbsp; # How many lines of failed messages to return postmaster:&nbsp;&nbsp;&nbsp; Admin&nbsp;&nbsp;&nbsp; # NetWare UIC of postmaster broadcast:&nbsp;&nbsp;&nbsp;&nbsp; 0&nbsp;&nbsp;&nbsp; # Yes, we want broadcast notifications, but receipts:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 0&nbsp;&nbsp;&nbsp; # ... no broadcasts for receipt confirmations PM_notify:&nbsp;&nbsp;&nbsp;&nbsp; 1&nbsp;&nbsp;&nbsp; # Do/Don't send errors to the postmaster change_owner:&nbsp; 1&nbsp;&nbsp;&nbsp; # Change message ownership to recipient auto_tzone:&nbsp;&nbsp;&nbsp; 1&nbsp;&nbsp;&nbsp; # If NZ, obtain timezone information from OS LogLevel:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 15&nbsp;&nbsp;&nbsp; # System message reporting level LogMax:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 100&nbsp;&nbsp;&nbsp; # Maximum number of system messages to store RetryPeriod:&nbsp;&nbsp; 30&nbsp;&nbsp;&nbsp; # Period between job retries (minutes) MaxRetries:&nbsp;&nbsp;&nbsp; 16&nbsp;&nbsp;&nbsp; # Maximum number of times a job can fail TwoPasses:&nbsp;&nbsp;&nbsp;&nbsp; 1&nbsp;&nbsp;&nbsp; # If NZ, process submission queue in 2 passes Autoaddress:&nbsp;&nbsp; 7&nbsp;&nbsp;&nbsp; # If NZ, auto-generate user addresses based on name Daily_exit:&nbsp;&nbsp;&nbsp; 0&nbsp;&nbsp;&nbsp; # If NZ, auto-restart each day after maintenance No_Areply:&nbsp;&nbsp;&nbsp;&nbsp; 0&nbsp;&nbsp;&nbsp; # If NZ, disable automatic replies system-wide Alt_Forward:&nbsp;&nbsp; 0&nbsp;&nbsp;&nbsp; # If NZ, allow alternate forwarding specification Maint_hour:&nbsp;&nbsp;&nbsp; 2&nbsp;&nbsp;&nbsp; # Hour for daily maintenance (24-hour clock) Maint_min:&nbsp;&nbsp;&nbsp;&nbsp; 0&nbsp;&nbsp;&nbsp; # Minute for daily maintenance Retry_Mode:&nbsp;&nbsp;&nbsp; 0&nbsp;&nbsp;&nbsp; # If NZ, use progressive backoff for queue retries Local_DSNs:&nbsp;&nbsp;&nbsp; 1&nbsp;&nbsp;&nbsp; # If NZ generate Delivery Status for local users only DSN_time1:&nbsp;&nbsp;&nbsp;&nbsp; 10800&nbsp;&nbsp;&nbsp; # Seconds deferred before first DSN is sent DSN_time2:&nbsp;&nbsp;&nbsp;&nbsp; 86400&nbsp;&nbsp;&nbsp; # Seconds deferred before second DSN is sent DSN_time3:&nbsp;&nbsp;&nbsp;&nbsp; 259200&nbsp;&nbsp;&nbsp; # Seconds deferred before third DSN is sent Host_in_title: 0&nbsp;&nbsp;&nbsp; # If NZ, show hostname in system tray and taskbar Lingering:&nbsp;&nbsp;&nbsp;&nbsp; 0&nbsp;&nbsp;&nbsp; # Enable or disable 'lingering mailboxes' Linger_Timeout: 60&nbsp;&nbsp; # Seconds before a lingering mailbox is shut down Alert_Host:&nbsp;&nbsp;&nbsp; notify.pmail.com&nbsp;&nbsp;&nbsp; # Host to check for licensee advisories Alert_Interval: 720&nbsp;&nbsp; # Frequency in minutes (min 240) for checks Alert_Flags:&nbsp;&nbsp; 3&nbsp;&nbsp;&nbsp; # Flags controlling advisory checks [MercuryC] Failfile : D:\WebServer\xampp\MERCURYMAIL\Mercury\FAILURE.MER Poll : 30 Scratch : D:\WebServer\xampp\MERCURYMAIL\Mercury ReturnLines : 15 Timeout : 30 ESMTP : 0 POP3_Auth : 0 Logfile : D:\WebServer\xampp\MERCURYMAIL\Logs Log_Verbose : 1 Session_logging : D:\WebServer\xampp\MERCURYMAIL\Logs Session_logmode : 1 [MercuryE] HELO : bighubi Poll : 15 Timeout : 60 Nameservers : 127.0.0.1 Log_Verbose : 0 DNS_Timeout : 20 DNS_Retries : 4 Transcripts : 1 MaxThreads : 10 [MercuryD] Scratch : D:\WebServer\xampp\MERCURYMAIL\Mercury Timeout : 30 Poll : 90 [MercuryS] Debug : 1 HELO : bighubi.de Logfile : D:\WebServer\xampp\MERCURYMAIL\Logs\MERCURYS.LOG Timeout : 30 Relay : 1 Strict_Relay : 0 Allow_Illegals : 0 SMTP_Authentication : 0 Session_logging : D:\WebServer\xampp\MERCURYMAIL\Logs Session_logmode : 1 Compliance_Settings : 0 Maximum_Failed_Rcpts : 4 Max_Relay_Attempts : 4 SSL_Mode : 0 ST_Blacklisting : 288 No_VRFY : 0 SMTP_ConnFlags : 0 [MercuryP] Scratch : D:\WebServer\xampp\MERCURYMAIL\Mercury Logfile : D:\WebServer\xampp\MERCURYMAIL\Mercury\pop3.log Stack : 32768 Mark_Read : 1 SSL_Mode : 0 Login_Disabled : 0 UIDL_nul_list : 1 New_UIDs : 0 No_NUL_passwords : 1 Session_logging : D:\WebServer\xampp\MERCURYMAIL\Mercury\sessions.log Session_logmode : 1 Timeout : 60 [MercuryX] # Cmd_Delay: 10 # Cmd_Wait: 1 # IE4_Dialling: 0 # Use_ETRN: 1 # Clients_only: 1 # Sunday: 0800,1800,3,15,30,60 # Monday: 0830,2100,5,15,60,60 # Tuesday: 0830,2100,5,15,60,60 # Wednesday: 1500,1900,2,30,5,30 # Thursday: 0900,1900,2,30,0,0 # Friday: 0830,2100,5,15,60,60 # Saturday: 1031,1035,2,45,-1,0 # [Groups] # testgroup&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; :&nbsp;&nbsp;&nbsp;&nbsp; TESTGRP [Domains] bighubi: bighubi bighubi: bighubi.net bighubi: bighubi.org bighubi: bighubi.com bighubi: bighubi.de [Maiser] Maiser:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Maiser&nbsp;&nbsp; # 'Username' of mail server account Helpfile:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; D:\WebServer\xampp\MERCURYMAIL\Mercury\MAISER.HLP&nbsp;&nbsp; # Help sent on failed maiser requests Lookupfile:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; D:\WebServer\xampp\MERCURYMAIL\Mercury\MAISER.LKP&nbsp;&nbsp; # Format file for the 'lookup' command Send_dir:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; D:\WebServer\xampp\MERCURYMAIL\Mercury\SENDABLE&nbsp;&nbsp; # Directory for the 'send' command Logfile:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; D:\WebServer\xampp\MERCURYMAIL\Logs\MAISER.LOG&nbsp;&nbsp; # Mail server log file Notify:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; D:\WebServer\xampp\MERCURYMAIL\Mercury\TMP&nbsp;&nbsp; # Dir. for pending 'notify' commands NoList:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; N&nbsp;&nbsp; # If 'Y', disable the 'list' command Local_only:&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; N&nbsp;&nbsp; # If 'Y', local 'notify' commands only [MercuryH] Logfile&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; :&nbsp;&nbsp;&nbsp;&nbsp; D:\WebServer\xampp\MERCURYMAIL\Logs\MERCURYH.LOG # Addressbook : \\CLIO\SYS\SYSTEM\MERCURY\PH.PMR # MOTD : \\CLIO\SYS\SYSTEM\MERCURY\PH-MOTD.TXT # Administrator : postmaster@clio.pmail.gen.nz Timeout : 30 [MercuryI] Scratch : D:\WebServer\xampp\MERCURYMAIL\SCRATCH Timeout : 120 Server_Port : 143 Idle_Timeout : 1800 SSL_Mode : 0 Login_Disabled : 0 [MercuryB] Scratch : D:\WebServer\xampp\MERCURYMAIL\SCRATCH Timeout : 120 Server_Port : 80 Idle_Timeout : 1800 [Groups] [Rewrite] [Statistics] StatFlags:&nbsp;&nbsp;&nbsp; 11&nbsp; # Statistical reporting settings StatFiles:&nbsp;&nbsp;&nbsp; D:\WebServer\xampp\MERCURYMAIL\Mercury\statistic.log&nbsp; # Directory to write stat log files StatMail:&nbsp;&nbsp;&nbsp;&nbsp; D:\WebServer\xampp\MERCURYMAIL\Mercury\email.log&nbsp; # Address to send stat log files STF_Hours:&nbsp;&nbsp;&nbsp; 24&nbsp; # How often to write stat log files STM_Hours:&nbsp;&nbsp;&nbsp; 24&nbsp; # How often to e-mail stat log files Hope is a little clue for you. Greetings from KielJörg

Rolf Lindby

posted Jul 26 '09 at 4:18 am

Could it be the same thing as in this thread (modules going to offline mode at startup)?

http://community.pmail.com/forums/thread/18409.aspx

/Rolf

Could it be the same thing as in this thread (modules going to offline mode at startup)?<a href="http://community.pmail.com/forums/thread/18409.aspx">http://community.pmail.com/forums/thread/18409.aspx</a>&nbsp;/Rolf&nbsp;

PaulW

posted Jul 26 '09 at 11:31 am

[quote user="Jörg"]I use the Mercury/32 on a win XP home installation, only on a local network (peer to peer). Today i have updatet from version 4.62 to 4.72 and i get some trouble. I would like to send an EMail from one account to another (via pegasusmail), the connect to server failed with message: 15: Peer connect failure (the host has refused the connection). This error occurs by sending and receiving. By checking with telnet host 25 i get the message, that no connection is possible to port 25 on the server(also port 110).

A look with Tcpview shows me, that the mercury only listend on port 106, but not on another ports.[/quote]

Is this a typo? 106 is not a normal port to use for mail.

[quote][MercuryS]
Debug : 1
HELO : bighubi.de
Logfile : D:\WebServer\xampp\MERCURYMAIL\Logs\MERCURYS.LOG
Timeout : 30
Relay : 1
Strict_Relay : 0[/quote]

Please sort out the relaying controls before you put this server on an internet address. These settings mean you are an open relay and you will be blacklisted. Go to Configuration/MercuryS/Connection control - Relaying. Ensure the first 2 checkboxes are marked.

[quote user="Jörg"]I use the Mercury/32 on a win XP home installation, only on a local network (peer to peer). Today i have updatet from version 4.62 to 4.72 and i get some trouble. I would like to send an EMail from one account to another (via pegasusmail), the connect to server failed with message: 15: Peer connect failure (the host has refused the connection). This error occurs by sending and receiving. By checking with telnet host 25 i get the message, that no connection is possible to port 25 on the server(also port 110). A look with Tcpview shows me, that the mercury only listend on port 106, but not on another ports.[/quote] Is this a typo?&nbsp; 106 is not a normal port to use for mail. [quote][MercuryS] Debug : 1 HELO : bighubi.de Logfile : D:\WebServer\xampp\MERCURYMAIL\Logs\MERCURYS.LOG Timeout : 30 Relay : 1 Strict_Relay : 0[/quote] Please sort out the relaying controls before you put this server on an internet address.&nbsp; These settings&nbsp;mean you are an open relay and you will be blacklisted.&nbsp; Go to Configuration/MercuryS/Connection control&nbsp;- Relaying.&nbsp; Ensure the first 2 checkboxes are marked. &nbsp;

Thomas R. Stephenson

posted Jul 26 '09 at 2:33 pm

> Hi
> First, sorry for my bad english.Embarrassed

No problem, better than my german. ;-)

> I use the Mercury/32 on a win XP home installation, only on a local
> network (peer to peer). Today i have updatet from version 4.62 to 4.72
> and i get some trouble. I would like to send an EMail from one account
> to another (via pegasusmail), the connect to server failed with message:
> 15: Peer connect failure (the host has refused the connection). This
> error occurs by sending and receiving. By checking with telnet host 25 i
> get the message, that no connection is possible to port 25 on the
> server(also port 110).

Ok, might be that the server is in the offline mode. Check out File menu to see what is happening.

> A look with Tcpview shows me, that the mercury only listend on port 106,
> but not on another ports.

XAMPP? Not sure this function works as designed, it does not for me.

> So i copy my backup back to the folder. After that, the mercury works
> fine.
> Here is my mercury.ini:

I see nothing wrong here.

>
> [General]
> myname: bighubi.de #

&gt; Hi &gt; First, sorry for my bad english.Embarrassed No problem, better than my german.&nbsp; ;-) &gt; I use the Mercury/32 on a win XP home installation, only on a local &gt; network (peer to peer). Today i have updatet from version 4.62 to 4.72 &gt; and i get some trouble. I would like to send an EMail from one account &gt; to another (via pegasusmail), the connect to server failed with message: &gt; 15: Peer connect failure (the host has refused the connection). This &gt; error occurs by sending and receiving. By checking with telnet host 25 i &gt; get the message, that no connection is possible to port 25 on the &gt; server(also port 110). Ok, might be that the server is in the offline mode.&nbsp; Check out File menu to see what is happening. &gt; A look with Tcpview shows me, that the mercury only listend on port 106, &gt; but not on another ports. XAMPP?&nbsp; Not sure this function works as designed, it does not for me. &gt; So i copy my backup back to the folder. After that, the mercury works &gt; fine. &gt; Here is my mercury.ini: I see nothing wrong here. &gt; &gt; [General] &gt; myname: bighubi.de #

bussibaer

posted Jul 26 '09 at 9:09 pm

Hi Thomas [:D]

> Thomas wrote:

> Ok, might be that the server is in the offline mode. Check out File menu to see what is happening.

Thanks for your answer. I'm looking in the filemenue for status of mercury. There was the option "Enter offline mode". I do that and after that i choice "leave offline mode". After that the mercury works fine.

In the second step i cancel the mercury and restart the server. After this i must do the two steps again. Is that normal? The older versions don't need the procedure, to go online.

> XAMPP? Not sure this function works as designed, it does not for me.

On XAMPP they deliver an older version of mercury, but i update it allways to a newer on.

> PaulW wrote:

> Is this a typo? 106 is not a normal port to use for mail.

I dont know for what is mercury listen on this port.

> Please sort out the relaying controls before you put this server on an

internet address. These settings mean you are an open relay and you

will be blacklisted. Go to Configuration/MercuryS Connection control -

Relaying. Ensure the first 2 checkboxes are marked.

I've done that. But the MercuryS is not so impottent for me, and the domain bighubi.de is only on my LAN, not official. [:D]

Hi Thomas [:D] &gt; Thomas wrote:&gt; Ok, might be that the server is in the offline mode.&nbsp; Check out File menu to see what is happening.Thanks for your answer. I'm looking in the filemenue for status of mercury. There was the option "Enter offline mode". I do that and after that i choice "leave offline mode". After that the mercury works fine.In the second step i cancel the mercury and restart the server. After this i must do the two steps again. Is that normal? The older versions don't need the procedure, to go online. &nbsp;&gt; XAMPP?&nbsp; Not sure this function works as designed, it does not for me.On XAMPP they deliver an older version of mercury, but i update it allways to a newer on.&nbsp;&gt; PaulW wrote:&gt; Is this a typo?&nbsp; 106 is not a normal port to use for mail.I dont know for what is mercury listen on this port.&gt; Please sort out the relaying controls before you put this server on an internet address.&nbsp; These settings&nbsp;mean you are an open relay and you will be blacklisted.&nbsp; Go to Configuration/MercuryS Connection control&nbsp;- Relaying.&nbsp; Ensure the first 2 checkboxes are marked.I've done that. But the MercuryS is not so impottent for me, and the domain bighubi.de is only on my LAN, not official.&nbsp;[:D]

Thomas R. Stephenson

posted Jul 26 '09 at 9:24 pm

> Hi Thomas
>
>
> > Thomas wrote:
>
> > Ok, might be that the server is in the offline mode. Check out File menu to see what is happening.
>
> Thanks for your answer. I'm looking in the filemenue for status of
> mercury. There was the option "Enter offline mode". I do that and
> after that i choice "leave offline mode". After that the mercury
> works fine.
>
> In the second step i cancel the mercury and restart the server.
> After this i must do the two steps again. Is that normal? The older
> versions don't need the procedure, to go online.

No this is not normal but for some reason it does this for some people when using MercuryX at least.

>
>
>
> > XAMPP? Not sure this function works as designed, it does not for me.
>
> On XAMPP they deliver an older version of mercury, but i update it
> allways to a newer on.
>
>
>
> > PaulW wrote:
>
> > Is this a typo? 106 is not a normal port to use for mail.
>
> I dont know for what is mercury listen on this port.

Port 106 is used for the password change server IIRC. Yep

200 lap.tstephenson.com MercuryW PopPass server ready.
help
100-Mercury PopPass Server v4.72
100-This server recognizes the following commands:
100-   USER     Enter your user (login) name
100-   PASS     Enter the password matching your username
100-   NEWPASS Change your password on this system.
100-   QUIT     Logout and close the connection.
100 You must login using USER/PASS before attempting NEWPASS.

&gt; Hi Thomas &gt; &gt; &gt; &gt; Thomas wrote: &gt; &gt; &gt; Ok, might be that the server is in the offline mode.&nbsp; Check out File menu to see what is happening. &gt; &gt; Thanks for your answer. I'm looking in the filemenue for status of &gt; mercury. There was the option "Enter offline mode". I do that and &gt; after that i choice "leave offline mode". After that the mercury &gt; works fine. &gt; &gt; In the second step i cancel the mercury and restart the server. &gt; After this i must do the two steps again. Is that normal? The older &gt; versions don't need the procedure, to go online. No this is not normal but for some reason it does this for some people when using MercuryX at least. &gt; &gt; &nbsp; &gt; &gt; &gt; XAMPP?&nbsp; Not sure this function works as designed, it does not for me. &gt; &gt; On XAMPP they deliver an older version of mercury, but i update it &gt; allways to a newer on. &gt; &gt; &nbsp; &gt; &gt; &gt; PaulW wrote: &gt; &gt; &gt; Is this a typo?&nbsp; 106 is not a normal port to use for mail. &gt; &gt; I dont know for what is mercury listen on this port. Port 106 is used for the password change server IIRC. Yep 200 lap.tstephenson.com MercuryW PopPass server ready. help 100-Mercury PopPass Server v4.72 100-This server recognizes the following commands: 100-&nbsp;&nbsp; USER&nbsp;&nbsp;&nbsp;&nbsp; Enter your user (login) name 100-&nbsp;&nbsp; PASS&nbsp;&nbsp;&nbsp;&nbsp; Enter the password matching your username 100-&nbsp;&nbsp; NEWPASS&nbsp; Change your password on this system. 100-&nbsp;&nbsp; QUIT&nbsp;&nbsp;&nbsp;&nbsp; Logout and close the connection. 100 You must login using USER/PASS before attempting NEWPASS.

Related Topics

Pending draft

Confirm move posts

Insufficient permissions

Select a different topic

Edit history